Proper use of fiber optic fusion splicer

Proper use of fiber welding machine fiber splice loss is reduced and an important guarantee for the key, follow these steps:
1. There shall be in strict accordance with the instructions and operating procedures welding machine, welding machine correct operation.
2. Reasonable place fiber, optical fiber splicer placed into V-groove action should be lightweight. This is because the core diameter of 10nm single-mode fiber, the splice loss to less than 0.1dB, the radial offset of the axis of the fiber is less than
0.8nm.

Proper use of fiber optic fusion splicer

Proper use of fiber optic fusion splicer

http://cafemamboibiza.com/?vuuijj=rencontre-des-femmes-comorienne-c%D0%93%C2%A9libataire&617=52 http://prettytallstyle.com/birkof/7645 published here frau sucht mann schwängern rencontre c car https://www.stimmenafrikas.de/tynec/2706 click here for more info profil original pour site de rencontre site rencontre gossy http://havanatranquility.com/daeso/182 Proper use of fiber optic fusion splicer
The optical fiber fusion type correctly set reasonable parameters (pre-discharge current, time and the main discharge current, the main discharge time).
4. After use, should be promptly removed and use of welding machine dust (especially clamps, each mirror and v-groove of dust and fiber Unqualified).
KeyWords: Fusion splicer
5. Electrical welding electrode life is generally about 2,000 times, using a long time after the electrodes will be oxidized, resulting in the discharge current is too large leaving the splice loss value is increased. In this case the electrodes can be removed, and then gently wipe with a cotton dipped in alcohol medical
Attached to the welding machine, and discharge cleaning. If after repeated washing discharge current is still too large, it shall replace the electrode.

Website: http://www.aitelong.com/

Comments are closed.