|
|
| |
|
 |
| Optical
Communication Testing |
|
 |
 |
| <click
photo> |
|
| SAT-3C/B
Series Optical Laser Source |
Applied
in parameter test in optical transmission, with
high sensitivity and accuracy.
Detection of optical transmission system, attenuation,
optical core check, etc;
Compatible with international optical instrument. |
|
|
|
 |
| <click
photo> |
|
| SAT-3D series
Optical Laser Sourse |
Complete
functions, easy operation, high sensitivity and
reliability.
Highly accurate measurement is used in the field
and laboratory.
Test the optical transmission system, attenuation
and fiber.
Be compatible with other optical instruments.
Battery low LED alarm. |
|
|
 |
| <click
photo> |
|
| SAT-4C Series
Optical Power Meter |
| SAT-4C
series portable optical power meter is widely used
in the fields of optical-fiber construction and
maintenance as an intelligent optical power meter
by adopting the techniques of Microcontroller of
singlechip. It has an internal installed LW probe
and exquisite design. Equipped with a new type thin
film switch, it can be operated easily with the
function of damp-proof and meet the demands of operation
under various conditions of environments. The whole
process of designing and manufacturing for this
product is controlled according to the ISO 9001
quality system standards. |
|
|
 |
| <click
photo> |
|
| SAT-4D series
Optical Power Meter |
| SAT-4D
series Optical Power Meter is mainly used for measuring
continuous optical signal. Adopting microprocessor
of single-chip machine to control, and it is with
complete functions. It is widely applied in optical
construction and maintenance, optical communication,
optical sensor, optical CATV and etc. |
|
|
 |
| <click
photo> |
|
| SAT-F2B Double
Optical Combination Testing Pack |
| SAT-F2B
Double Optical Combination Testing Pack includes
SAT-3C Double LD Source, SAT-4C Optical Power Meter,
which is suitable for optical testing field with
two wavelengths of 1310nm and 1550nm. |
|
|
|
| <click
photo> |
|
| SAT-F4 series
Optical Multimeter |
| SAT-F4
series Optical Multimeter is handheld and intelligent
multi-function measurement instrument integrating
with LD source and optical power range module, SAT-F4
series could provide light source of single-wavelength
continuous light and all functions of SAT-4D series
optical power meter, and the wavelength of light
source could be 850nm、1310nm、1550nm、1625nm. It is
the best selection for major engineering test operators
and technicians. It is applicable for field operation
and high-precision measurement under laboratory. |
|
|
|
| <click
photo> |
|
| SAT-9A Adjustable
Digital Light Attenuator |
| The
SAT-9A Adjustable Digital Light Attenuator is mainly
used for the attenuation of continuous optical signal
power, whose core components are imported high-performance
ones to enable it to have the ability of quick regulation
of attenuation value with good linearity, high accuracy,
low insertion loss and attenuation locating, etc.
The instruments are widely applicable for optical
cable construction and maintenance, fiber optic
communication, fiber optic sensor and CATV, etc.
|
|
|
 |
| <click
photo> |
|
| SAT-3C04
Optical Visual Fault Locator |
| SAT-3C04
Optical Visual Fault Locator is used for optical
identification, fault locating of single mode fiber
or multimode fiber, which is basic tool of optical
network, LAN, FDDI, ATM optical system, and telecom
network system maintenance with small structure,
portable design, and simple operation, it adopts
AA battery for power supply, and it is greatly suitable
for field operation. |
|
|
 |
| <click
photo> |
|
| SAT-5X series
Optical Talk Set |
| According
to the current situation of optical fiber communication,
the SAT-5X portable Optical Talk Set is developed
using internationally advanced technology with the
features of small and handy structure, portability,
high speech quality, large dynamic range, and easy
operation, and is widely used in the construction
and maintenance of optical cable, optical fiber
communication, and optical fiber CATV, etc., and
especially suitable for communication under severe
atmospheric condition. |
|
|
 |
| <click
photo> |
|
| SAT-6X Optical
Fiber Identifier |
| According
to the current situation of optical fiber communication,
the SAT-6X Optical Fiber Identifier is developed
using internationally advanced technology with the
features of small and handy structure, portability,
and easy operation, and is widely used in the construction
and maintenance of optical cable, optical fiber
communication, and optical fiber CATV, etc. |
|
|
 |
| <click
photo> |
|
| SAT-FC01
Fiber Cleaning Tools kit |
| Aiming
at the characteristic of daily cleaning and maintenance
for the communication station and demands of different
maintenance work flows, the product is selected
and integrated to provide a proper solution. The
matched tools are all researched & developed
to meet the features of the products and provide
multiple choices for customers. It is a high-content
science & technology product which is applied
in all kinds of fiber interface cleaning in fiber
communication network. The traditional way of cleaning
was to use alcohol cotton, which could easily bring
about destroying and damage to the fiber interface.
Therefore, in some foreign countries, the usage
of cotton ball for fiber equipment cleaning is forbidden.
Our products can be applied in the cleaning of any
instrument and equipment with fiber interface. This
system is suitable for the daily maintenance for
optical communication station, transmission room,
laboratory, fiber network and others. |
|
|
 |
| <click
photo> |
|
| SAT-17A Optical
Fusion Splicer |
·9
seconds quick splice
·Low fusion consumption
·Applicable for all kinds of silica fiber
·Multi splice program selections
·Automatic detection of optical end face
·5 inch LCD color display screen with high performance |
|
|
 |
| <click
photo> |
|
| Packing list
of SAT-O2B Fiber Construction Tools kit |
1、Multi-purpose
Screwdriver Pack
2、Skid-resistant Scissor
3、Fiber Stripper
4、Fiber Transverse Cable Cutter
5、Steel Wire Plier |
|
|
|
|
