SAT-1XS Series E1 and Datacom Tester
- Description:
5 inch LCD with backlight, the largest screen in the industry
Handheld, rugged design, easy to operation
Particular history and real-time LED indicator design, find troubles more clearly
Smart auto configuration feature
Alarm and Histogram analysis for troubleshooting
Multi-task operation at the same time
Store 20 test results and 9 test configurations, with power-off memory
Automatically power on/off testing by programmable timer
- Contact Now
-
Tel: +86 29 6566 0081
E-mail: sales@aitelong.com
- Description
- Specification
- Packing list
- Datasheet download
Key Features
－5 inch LCD with backlight, the largest screen in the industry
－Handheld, rugged design, easy to operation
－Particular history and real-time LED indicator design, find troubles more clearly
－Smart auto configuration feature
－Alarm and Histogram analysis for troubleshooting
－Multi-task operation at the same time
－Store 20 test results and 9 test configurations, with power-off memory
－Automatically power on/off testing by programmable timer
－Powerful PC software supports download results to PC, data analysis, report generation, printing, etc.
－Software updating
Key Functions
SAT-1AS:
Normal test
Pass through testing
Audio frequency test
SAT-1BS: provides more two functions than SAT-1AS:
Loop delay test
Automatic protection switching time testing (APS)
SAT-1CS: provides more three functions than SAT-1BS:
2Mbit/s line level and frequency testing
Datacom test
Co-directional 64Kbit/s test
Applications for E1
－Service-interrupted error testing
－On-line service error testing
－Framed and unframed signals generation and reception
－2Mbit/s unframed error performance testing
－2Mbit/s framed N×64Kbit/s channel error testing
－Bit error, coding error, frame error, CRC error and E-bit error testing
－Signal loss alarm, AIS alarm, framed remote alarm, multi-framed remote alarm, out-of-frame, and pattern loss alarm
－Frequency offset transmitting
－Voice channel signal level and frequency testing
－Pattern slip testing
－Pass through testing
－Audio frequency testing
－Loop delay test (except SAT-1AS)
－Automatic protection switching time testing (APS) (except SAT-1AS)
－Voice monitoring
－Signal state display, Voice channel content display, Voice channel busy / idle indication
－Alarm and error histogram analysis
－Time slot content analysis, drop and insert signal on each time slot
－Framed content analysis
－G. 821/G. 826/M. 2100 performance analysis
－Multi errors and alarms inserting
－Three input modes (terminating, bridging and monitoring)
－Provides two clock options (internal and picking-up)
Applications for Datacom
－Includes V.24/V.28/RS232, V.35, V.36/RS-449, X.21, RS-485, RS422, EIA-530, EIA-530A
－SYNCH and ASYNCH testing
－DTE and DCE emulation
－Bit code testing
－Pattern slip testing
－Signal loss alarm
－Line signal frequency testing
－Loop delay testing
－Automatic protection switching time testing(APS)
－G.821, M2100 service-interrupted error testing
Applications for Co-directional 64Kbit/s
－Service-interrupted error testing
－Bit code testing
－Pattern slip testing
－Signal loss, AIS alarm
－Line signal frequency testing
－Loop delay testing
－Automatic protection switching time testing(APS)
－G.821, M.2100 error performance testing
E1/2M Technical Specifications
(1)Signal input rate: 2048Kbit/s 50ppm (G.703 requirement±100ppm)
(2)Signal code: HDB3, AMI.
(3)Input jitter tolerance: up to G.823
(4)Input Impedance
Unbalance terminating: 75Ω; balance terminating: 120Ω
(5)Signal structure
(5.1) Unframed structure
(5.2) Framed structure: PCM30, PCM31, PCM30CRC, PCM31CRC, complied with G.704
(6)Testing pattern: 26-1, 29-1, 211-1, 215-1, 220-1, 223-1, and artificial code
(7)Error code insertion: Bit Error, Framed Error, Pattern Slip; None, Single, Ratio 10-1~10-7.
(8)Alarm insertion: No Signal, Frame Loss, AIS, Patten Loss
Datacom Technical Specifications
(1)Interface type: V.24/V.28/RS232, V.35, V.36/RS-449, X.21, RS-485, RS422, EIA-530, EIA-530A
(2)Generator
(2.1) SYNCH mode
Clock source: internal and picking-up clock
Phase relation between clock and data: co-direction or reverse direction.
Rate: 1.2, 2.4, 4.8, 9.6, 14.4, 19.2, 38.4, 48, 56(Kbps), N×64Kbps (N=1~32)
Error: ±15ppm (ppm: parts per million)
(2.2) ASYNCH mode
Rate (bps): 50, 75, 110, 150, 200, 300, 600, 1200, 2400, 3600, 4800, 7200, 9600, 14.4K, 19.2K, 38.4K, 57.6K
Data structure: Word Length: 5, 6, 7, 8(bits) Stop Bit: 1, 2(bits)
Odd-even detection: Odd, Even, 1, 0, None.
(2.3) Error code insertion: None, Single, or Ratio 10-1~10-7.
(3)Receiver
(3.1) SYNCH mode
Clock source: internal and picking up clock
Phase relation between receive clock and receive data: Co-direction or reverse direction.
Clock Rate: 2048Kbps maximum
(3.2) ASYNCH mode
The rate and data structure are as same as the generator.
(4)Testing pattern: 26-1, 29-1, 211-1, 215-1, 220-1, 223-1, and artificial code
Co-directional 64Kbit/s Technical Specifications
(1)Signal input rate: 64Kbit/s 50ppm(G.703 requirement ±100ppm)
(2)Input impedance: balance 120Ω, up to G.703
(3)Input jitter tolerance: up to G.823.
(4)Impedance of output interface: balance 120Ω, up to G.703
(5)Testing pattern: 26-1, 29-1, 211-1, 215-1, 220-1, 223-1, and artificial code
(6)Error code insertion: Bit Error, Pattern Slip, None, Single, Ratio 10-1~10-7.
(7)Alarm insertion: No Signal, AIS, Patter Loss
General Specifications
(1)Power supply
(1.1)Special power adapter
Input: AC220V 50Hz
Output: DC 9V 1.2A
(1.2)Internal rechargeable battery
4000mAh, 6V nickel-hydrogen rechargeable battery
Working time: 8 hours
Charging: 8 hours at power-off state, and 12 hours at power-on state
(2)Dimension and weight
L×W×H: 220×162×48 (mm)
(3)Weight: 950g
(4)Ambient parameters
Operation temperature: -10~+50℃
Storage temperature: -30~+70℃
Humidity: 5%~90%, non-condensing
It is only for reference. The actual accessories and quantity are according to demand.
No.
Item
Qty.
1
SAT-1CS E1/Datacom Tester
1 pc
2
User Manual
1 pc
3
Attached disk
1 pc
4
Qualified Certificate of Products/Warranty Card
1 pc
5
Packing list
1 pc
6
75ΩBNC-J5 Test cable
1 pc
根
7
BNC-L9 Test wire
2 pcs
8
RS232 Serial Port wire
1 wire
9
Special Data Test Cable I(V.24, RS-485, EIA-530, EIA-530A）
1 pc
10
Special Data Communication Test Cable Ⅱ(RS-449, V.11)
1 pc
11
Special Data Communication Test Cable Ⅲ(X.21)
1 pc
12
Special Data Communication Test Cable Ⅳ(V.35)
1 pc
13
Switch Wire
1 pc
14
Power supply Adapter
1 pc
15
Portable bag
1 pc