Product Search
AITELONG Products
SAT-6C03
SAT-6C03 can detect optical signal presence/type and direction anywhere on fibers during optical network deployment, maintenance and troubleshooting. With non-destructive macro-bend detection technology, it introduces no damage to tested fiber or interference to the service on fiber. SAT-6C is able to identify wide-spectrum signals (such as signals in CATV system) and can be used in SONET/SDH & DWDM systems tests.
Key Features
l Fiber types: 250μm, 900μm, 2mm/3mm jacketed fiber
l Non-destructive detection
l Indication of signal presence, strength and direction
l CW/MOD tones detection
l Buzzer indication
l Handheld & sturdy
SAT-6C03 can detect optical signal presence/type and direction anywhere on fibers during optical network deployment, maintenance and troubleshooting. With non-destructive macro-bend detection technology, it introduces no damage to tested fiber or interference to the service on fiber. SAT-6C is able to identify wide-spectrum signals (such as signals in CATV system) and can be used in SONET/SDH & DWDM systems tests.
Key Features
l Fiber types: 250μm, 900μm, 2mm/3mm jacketed fiber
l Non-destructive detection
l Indication of signal presence, strength and direction
l CW/MOD tones detection
l Buzzer indication
l Handheld & sturdy
Specification
Model | SAT-6C03 |
Wavelength | 800~1700nm |
Detector Type | InGaAs |
Signal Type | CW, 270Hz±5%, 1kHz±5%, 2kHz±5% |
Display | Signal presence, Signal strength, Signal direction, MOD frequency |
Insertion Loss (Typical value) | 0.8dB(1310nm); 2.5dB(1550nm) |
Signal Direction Test Range | -46-+10dBm(1310nm); -50-+10dBm(1550nm) |
Detect Sensitivity(1) | ≤ -50dBm |
Insertion Loss | H 0.25~H 0.9: 0.1dB; H 2.0~H 2.5: 0.5dB; H 2.5~H3.0: 1.0 dB |
Fiber Type | 250um bare fiber, 900um/ 2mm/3mm jacketed fiber |
Battery | 9V Alkaline Battery |
Battery Life | ≥24 hours |
Operating Temperature | -10 ~ 50℃ |
Storage Temperature | -25 ~70℃ |
Relative Humidity | 0 ~ 95% (Non-condensing) |
Weight | 235g |
Dimensions (H×W×T) | 196×35×30mm |
Note: (1) Typical value at 1310/1550nm
* Specifications subject to change without notice
Related Products
SAT-6C can detect optical signal presence/type and direction anywhere on fibers during optical network deployment, maintenance and troubleshooting. With non-destructive macro-bend detection technology, it introduces no damage to tested fiber or interference to the service on fiber. SAT-6C is able to identify wide-spectrum signals (such as signals in CATV system) and can be used in SONET/SDH & DWDM systems tests.
View ProductNo products found in this category.