hookup partner meaning Fiber welding machine with a variety of different programs, allow for different fiber processing. The program has a number of variable parameters, including the length of time for the protective cover of the processing time and processing temperature. These programs can be easily stored in the memory, and when necessary to prepare for the use of out of tune.rencontre eyguieres
rencontre sur internet sans inscription http://huntersneeds.net/rigaro/3367 Fiber Fusion Splicer reflection-type alignment system to improve the quality of welding is mainly manifested in what time
1. Impact from light (fiber) cable of the material: different splice loss between the fibers will be affected by different eccentricity, partial circularity, material, melting point, and so on, which is welded construction site is too large losses of principal reason, the system can effectively use the LID solve this problem, because the light incident on the optical fiber LID system is strong and weak light source to align the fiber, fibers from the appearance, the impact of the material, a new generation of more AFC automatic adjustment system (eg: CORNING X60), the fiber can be precisely controlled fusing temperature, to obtain a minimum splice loss.
2. save more than half the working hours: LID splice systems extremely high success rate, because the loss of value is too high and re-welded condition rare, can effectively improve work efficiency.
3. Low failure rate: currently LID system also has PAS system, which can be used to switch between. One of the system when a fault occurs, such as work, you can switch immediately to continue to use another system.
KeyWords: citas iquique gratis Fusion splicer
4. enhance the quality of work: LID system itself is a fiber loss tester, fiber splicing loss can be directly tested point upon completion of welding, so the quality of the optical fiber line can maintain a very high standard.
5. Reduce the loss of the optical fiber line: there are problems with the optical fiber eccentricity and partial circularity using LID techniques may be precisely aligned with the core of the core, which can effectively reduce the value of splice loss.
6. Now the construction of communications, especially for trunk more stringent requirements, so improve the quality of welding is heavy work of communication officers.